10650 Fern Avenue • Unit F • Stanton, CA 90680 • Tel: 714-527-4874Fax: 714-527-4894Cell: 714-767-9818
Email: dabgcmm@aol.comwww.gcmmi.comwww.marseco.com • we accept Visa & Mastercard we accept Visa and Mastercard
Dave Belovsky

Rinse Systems

This system provides an adjustable high pressure water blast 0-800 psi to thoroughly clean the surface and barrels of holes in printed circuit boards and metal panels. An efficient, filtered air system is the key to the drying principle. A high velocity pressure type self cleaning aluminum fan produces 1450 cubic feet of air per minute at 15 inches of static pressure. Ambient air is then fed through six uniquely designed airknives (three top and three bottom) that blast away any trace of moisture, including all through holes.

The rinse section consists of four spray bars with strategically placed "High Pressure Jet Spray Nozzles" (15 top and 15 bottom for 24" wide systems, and 19 top and 19 bottom for 30" wide systems) which are designed to provide a positive overlapping rinse pattern from 0-800 psi. This assures complete rinsing and removal of loose particles from both panel surfaces and barrels of drilled holes.

The conveyor rollers are constructed of a three piece design. Brass end plugs are machined and pressed into a steel tube, forming a rigid yet resilient conveyor roll that is impervious to moisture and most chemicals, yet will not damage the most delicate of circuit boards.

Other key features are:

  • The frame is constructed of welded angular steel and coated with high quality chemical and rust resistant paints.
  • The precision machined frame plates are fabricated of high impact stress relieved polyvinyl chloride and connected by heavy duty stainless steel bars to ensure positive warp resistant construction.
  • The high pressure manifold is constructed of heavy wall type 304 stainless steel, and is designed to withstand up to 5,000 lbs of pressure.
  • External covers are constructed of 1/4" PVC to withstand the most rugged abuse. They are custom fitted to obtain a streamlined finish.
  • The Jaguar Series "Cat" pump is a positive displacement, three cylinder piston type, 0-800 psi, high pressure pump that utilizes 20 GPM. No water is used when connected to our in-line Closed Loop Filtration System.
  • Fixed or variable speed conveyor for precise process control and smooth positive roller action.
  • High velocity forced ambient or heated air drying.
  • 24" and 30" wide models available.
  • Process parts 2"-24" in width, and 3" or longer in length.
  • Process parts 0.01" to 0.25" in thickness.
  • Control switches and indicators are conveniently located on the front of the machine.
  • Optional remote electrical control panel.
  • Low water usage which reduces operating costs.
  • Optional closed loop filtration system which removes particulate contaminates such as copper from deburring and scrubbing equipment. Since this is a closed loop system, external water is not required which further reduces operating costs.
  • Minimum floor space requirement.
  • Domestic and export power.
click image to enlarge rinse systems
© Global Custom Machine Manufacturing, Inc.